- CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
TRADE NAME .... : BLACK EXP 10459
PRODUCT TYPE .. : InkJet ink; water based; nonflammable
EMERGENCY PHONE (CHEMTREC 24 HOUR): 800-424-9300
REASON FOR MSDS ISSUE: Formula modification
MSDS VERSION: NA
- COMPOSITION/INFORMATION ON INGREDIENTS
CHEMICAL FAMILY: WATER/DYE MIXTURE
HAZARDOUS COMPONENTS CAS # WEIGHT %
PYRROLIDONE, 2- 616-45-5 1-10%
No PEL established.
UREA 57-13-6 < 2%
No PEL established.
The New Jersey Trade Secret Registration Number of proprietary
ingredients is controlled by the KIMBERLY-CLARK PRINTING TECHNOLOGY
product item number. Ingredients not precisely identified are
proprietary or non-hazardous. Values are not product specifications.
- HAZARDS IDENTIFICATION
HMIS CODES: H F R P
1 0 0 C
INHALATION HEALTH RISKS AND SYMPTOMS OF EXPOSURE:
None reported or known o exist for the product unless listed
here:
SKIN AND EYE CONTACT HEALTH RISKS AND SYMPTOMS OF EXPOSURE:
Eye/skin: May cause irritation.
INGESTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE: May cause
gastrointestinal irritation, vomiting, nausea, and diarrhea.
ACUTE HEALTH HAZARDS: Moderate eye and skin irritation.
MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE: None known
or determined for the product
CHRONIC HEALTH HAZARDS: None known or determined for the product.
CARCINOGENICITY: Product not tested. IARC, NTP, OSHA listed
carcinogen components equal to or greater than 0.1% by weight
will be listed in paragraph 2 and described as carcinogens,
if any.
- FIRST AID MEASURES
EMERGENCY AND FIRST AID PROCEDURES:
Swallowed: Do NOT induce vomiting. Call a doctor and contact
local poison control center immediately.
Eye contact: Flush eyes thoroughly with water. Seek medical
attention if irritation persists.
Skin contact: Wash contaminated areas with soap and water.
Inhaled: Remove victim to fresh air.
- FIRE FIGHTING MEASURES
FLASH POINT: N/A (Non-flammable water based)
METHOD USED: NA
FLAMMABLE LIMITS IN AIR BY VOLUME- LOWER: NA UPPER: NA
EXTINGUISHING MEDIA: NA
SPECIAL FIREFIGHTING PROCEDURES: NA
UNUSUAL FIRE AND EXPLOSION HAZARDS: NA
6. ACCIDENTAL RELEASE MEASURES
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED
Soak up on paper or other absorbent and scoop into closed containers.
Flush area with plenty of water.
7. HANDLING AND STORAGE
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING
Storage temperature: Standard room temperature (68 degrees Fahrenheit).
Special sensitivity: Heat, light, moisture.
Precautions: Keep container closed. Store away from traffic.
OTHER PRECAUTIONS
None.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
RESPIRATORY PROTECTION: Not necessary.
VENTILATION: Mechanical ventilation is acceptable.
PROTECTIVE GLOVES: Rubber
EYE PROTECTION: Goggles or safety glasses with side shields.
OTHER PROTECTIVE CLOTHING OR EQUIPMENT: Impervious clothing
where skin
contact is unavoidable; eyewash station.
WORK/HYGIENIC PRACTICES: Avoid contamination of food, drink,
etc. No
smoking when handling.
9. PHYSICAL AND CHEMICAL PROPERTIES
BOILING POINT: > 200¯ F SPECIFIC GRAVITY (H2O=1): >
1
VAPOR PRESSURE (mm of Hg): ND VAPOR DENSITY (AIR = 1): >
1
EVAPORATION RATE (BUTYL ACETATE=1): > 1 MATERIAL VOC: Not
measured
PHYSICAL STATE: Liquid COLOR : BLACK
ODOR: Mild SOLUBILITY IN WATER: Complete
10. REACTIVITY
STABILITY: Stable
CONDITIONS TO AVOID: None known
INCOMPATIBILITY (MATERIALS TO AVOID): Oxidizing materials and
strong
acids.
HAZARDOUS DECOMPOSITION OR BYPRODUCTS: Oxides of carbon and
nitrogen.
HAZARDOUS POLYMERIZATION: None
11. TOXICOLOGICAL INFORMATION
No information available.
12. ECOLOGICAL INFORMATION
No information available.
ITEM NUMBER: F490500 DATE PRINTED: 08/26/1999 Page: 3
13. DISPOSAL CONSIDERATIONS
WASTE DISPOSAL METHOD
Waste shall be disposed of in accordance with federal, state,
and local
environmental control regulations.
14. TRANSPORTATION INFORMATION
D.O.T. SHIPPING NAME: Not regulated.
15. PRODUCT REGULATORY INFORMATION
OSHA STATUS: Product not tested. It is not considered to be
toxic per
29CFR1910.1200 but is considered to be a skin/eye irritant.
USA TSCA STATUS: This product meets the requirements of the
Toxic
Substances Control Act.
INTERNATIONAL EXPORT/IMPORT STATUS: Not determined for every
country.
Contact KIMBERLY-CLARK PRINTING TECHNOLOGY for certification
if
required. Formulas are proprietary, so ingredient lists may
only be
released to Customs/Health offices designated to control trade
secrets.
SARA TITLE III SECTION 313 TOXIC CHEMICALS: Product not listed.
SARA
listed ingredients at or above De Minimis reporting levels are
noted in
paragraph 2, if any.
RCRA HAZARDOUS WASTE NUMBER/STATUS: If discarded in its purchased
form,
this product would not be a federal hazardous waste either by
listing or
by characteristic. States, however, often have stricter criteria.
Users
should check with their state regulatory agencies for current
hazardous
waste criteria. Under RCRA it is the responsibility of the product
user
to determine at the time of disposal whether a material containing
the
product or derived from the product should be classified as
a hazardous
waste (40CFR261.20-24).
OZONE-DEPLETING CHEMICALS: No regulated ingredients.
NEW JERSEY
REPORTABLE COMPONENTS CAS #
WATER 7732-18-5
DYE, NONHAZARDOUS SUPPLYPROP54
PYRROLIDONE, 2- 616-45-5
UREA 57-13-6
BIOCIDE FL PROP 176
The New Jersey Trade Secret Registration Number of proprietary
ingredients is controlled by the KIMBERLY-CLARK PRINTING TECHNOLOGY
product item number.
CALIFORNIA PROPOSITION 65 (CARCINOGENS):
REPORTABLE COMPONENTS CAS # WEIGHT %
. NONE UNLESS LISTED, AS FOLLOWS:
CALIFORNIA PROPOSITION 65 (REPRODUCTIVE TOXINS):
REPORTABLE COMPONENTS CAS # WEIGHT %
. NONE UNLESS LISTED, AS FOLLOWS:
- OTHER INFORMATION
All information appearing herein is based upon data obtained
from the manufacturer and/or recognized technical sources. This
information is believed to be correct, but does not purport
to be all inclusive and shall be used only as a guide. KIMBERLY-CLARK
PRINTING TECHNOLOGY, INC. makes no warranty, express or implied,
as to the accuracy or completeness of this information. It is
the user's responsibility to determine the suitability of this
information for the adoption of necessary safety precautions
and/or compliance with federal, state, and local laws and regulations.