M A T E R I A L   S AF E T Y   D A T A S H E E T

1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
   

   TRADE NAME .... : Color Set EXP 16116
   PRODUCT TYPE .. : InkJet ink; water based; nonflammable

   EMERGENCY PHONE (CHEMTREC 24 HOUR): 800-424-9300
   REASON FOR MSDS ISSUE: Formula modification
   MSDS VERSION: NA

2. COMPOSITION/INFORMATION ON INGREDIENTS
   

   CHEMICAL FAMILY: DYE/WATER/GLYCOL

   HAZARDOUS COMPONENTS CAS # WEIGHT %
   GLYCOL FL PROP 92 15-25%
   No PEL established. See ingestion note.
   PYRROLIDONE, 2- 616-45-5 5-15%
   No PEL established.
   PHTHALOCYANINE DYE FL PROP52 1-10%
   0.5-2% copper in complex form.
   OSHA 1.0 mg/m3 (as Cu dusts/mists).
   See note under carcinogenicity.
   ISOPROPYL ALCOHOL 67-63-0 1-10%
   ACGIH TWA-TLV 400 ppm. TSCA Sec 12(b) export notification required.

   The New Jersey Trade Secret Registration Number of proprietary ingredients is controlled by the KIMBERLY-CLARK PRINTING TECHNOLOGY product item number. Ingredients not precisely identified are proprietary or non-hazardous. Values are not product specifications.

3. HAZARDS IDENTIFICATION
   

   HMIS CODES: H F R P
   1 0 0 C

   INHALATION HEALTH RISKS AND SYMPTOMS OF EXPOSURE: None reported or known to exist for the product unless listed here:

   SKIN AND EYE CONTACT HEALTH RISKS AND SYMPTOMS OF EXPOSURE:
   Eye/skin: May cause irritation.

   INGESTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE: May cause gastrointestinal irritation, vomiting, nausea, and diarrhea. May be harmful or fatal if swallowed; may produce central nervous system depression, kidney and liver damage.

   ACUTE HEALTH HAZARDS: Moderate eye and skin irritation.

   MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE: None known or determined for the product

   CHRONIC HEALTH HAZARDS: None known or determined for the product.

   CARCINOGENICITY: Product not tested. IARC, NTP, OSHA listed carcinogen components equal to or greater than 0.1% by weight will be listed in paragraph 2 and described as carcinogens, if any.

4. FIRST AID MEASURES
   

   EMERGENCY AND FIRST AID PROCEDURES:
   Swallowed: Do NOT induce vomiting. Call a doctor and contact local poison control center immediately.

   Eye contact: Flush eyes thoroughly with water. Seek medical attention if irritation persists.

   Skin contact: Wash contaminated areas with soap and water.

   Inhaled: Remove victim to fresh air.

5. FIRE FIGHTING MEASURES
   

   FLASH POINT: N/A (Non-flammable water based)
   
   METHOD USED: NA
   
   FLAMMABLE LIMITS IN AIR BY VOLUME- LOWER: NA UPPER: NA
   
   EXTINGUISHING MEDIA: NA
   
   SPECIAL FIREFIGHTING PROCEDURES: NA
   
   UNUSUAL FIRE AND EXPLOSION HA ZARDS: NA

6. ACCIDENTAL RELEASE MEASURES
   

   STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Soak up on paper or other absorbent and scoop into closed containers. Flush area with plenty of water.

7. HANDLING AND STORAGE
   

   PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING
   Storage temperature: Standard room temperature (68 degrees Fahrenheit).

   Special sensitivity: Heat, light, moisture.

   Precautions: Keep container closed. Store away from traffic.

   OTHER PRECAUTIONS: None.

8. EXPOSURE CONTROLS/PERSONAL PROTECTION
   

   RESPIRATORY PROTECTION: Not necessary.

   VENTILATION: Mechanical ventilation is acceptable.

   PROTECTIVE GLOVES: Rubber

   EYE PROTECTION: Goggles or safety glasses with side shields.

   OTHER PROTECTIVE CLOTHING OR EQUIPMENT: Impervious clothing where skin contact is unavoidable; eyewash station.

   WORK/HYGIENIC PRACTICES: Avoid contamination of food, drink, etc. No smoking when handling.

9. PHYSICAL AND CHEMICAL PROPERTIES
   
   BOILING POINT: > 200¯ F SPECIFIC GRAVITY (H2O=1): > 1
   VAPOR PRESSURE (mm of Hg): ND VAPOR DENSITY (AIR = 1): > 1
   EVAPORATION RATE (BUTYL ACETATE=1): > 1 MATERIAL VOC: Not measured
   PHYSICAL STATE: Liquid COLOR : CYAN
   ODOR: Mild SOLUBILITY IN WATER: Complete



10. REACTIVITY
    
    STABILITY: Stable
    CONDITIONS TO AVOID: None known
    INCOMPATIBILITY (MATERIALS TO AVOID): Oxidizing materials and strong
    acids.
    ITEM NUMBER: F497166 DATE PRINTED: 08/20/1999 Page: 3
    HAZARDOUS DECOMPOSITION OR BYPRODUCTS: Oxides of carbon and nitrogen.
    HAZARDOUS POLYMERIZATION: None



11. TOXICOLOGICAL INFORMATION
    No information available.



12. ECOLOGICAL INFORMATION
    No information available.



13. DISPOSAL CONSIDERATIONS
    

    WASTE DISPOSAL METHOD: Waste shall be disposed of in accordance with federal, state, and local environmental control regulations.

14. TRANSPORTATION INFORMATION
    
    D.O.T. SHIPPING NAME: Not regulated.



15. PRODUCT REGULATORY INFORMATION
    

    OSHA STATUS: Product not tested. It is not considered to be toxic per 29CFR1910.1200 but is considered to be a skin/eye irritant.

    USA TSCA STATUS: This product meets the requirements of the Toxic Substances Control Act.

    INTERNATIONAL EXPORT/IMPORT STATUS: Not determined for every country.

    Contact KIMBERLY-CLARK PRINTING TECHNOLOGY for certification if required. Formulas are proprietary, so ingredient lists may only be released to Customs/Health offices designated to control trade secrets.

    SARA TITLE III SECTION 313 TOXIC CHEMICALS: Product not listed. SARA listed ingredients at or above De Minimis reporting levels are noted in paragraph 2, if any.

    RCRA HAZARDOUS WASTE NUMBER/STATUS: If discarded in its purchased form, this product would not be a federal hazardous waste either by listing or by characteristic. States, however, often have stricter criteria. Users should check with their state regulatory agencies for current hazardous waste criteria. Under RCRA it is the responsibility of the product user to determine at the time of disposal whether a material containing the product or derived from the product should be classified as a hazardous waste (40CFR261.20-24).

    OZONE-DEPLETING CHEMICALS: No regulated ingredients.

    NEW JERSEY
    REPORTABLE COMPONENTS CAS #
    WATER, DEIONIZED 7732-18-5
    GLYCOL FL PROP 92
    FILLER, NONHAZARDOUS SUPPLYPROP38
    PYRROLIDONE, 2- 616-45-5
    PHTHALOCYANINE DYE FL PROP52

    The New Jersey Trade Secret Registration Number of proprietary ingredients is controlled by the KIMBERLY-CLARK PRINTING TECHNOLOGY product item number.

    CALIFORNIA PROPOSITION 65 (CARCINOGENS):
    REPORTABLE COMPONENTS CAS # WEIGHT %
    . NONE UNLESS LISTED, AS FOLLOWS:

    CALIFORNIA PROPOSITION 65 (REPRODUCTIVE TOXINS):
    REPORTABLE COMPONENTS CAS # WEIGHT %
    . NONE UNLESS LISTED, AS FOLLOWS:

16. OTHER INFORMATION
    

    All information appearing herein is based upon data obtained from the manufacturer and/or recognized technical sources. This information is believed to be correct, but does not purport to be all inclusive and shall be used only as a guide. KIMBERLY-CLARK PRINTING TECHNOLOGY, INC. makes no warranty, express or implied, as to the accuracy or completeness of this information. It is the user's responsibility to determine the suitability of this information for the adoption of necessary safety precautions and/or compliance with federal, state, and local laws and regulations.